|
C3 Series
|
Maximum Feed rates:
42 GPH at 0 PSI 160 LPH at 0 Bar
Output pressures up to 175 PSI (12 bar) Variable Speed Drive Washdown (NEMA 4X, IP66) Turndown Ratio 100:1 Accuracy +/- 2% full scale Output adjustment 1% to 100%
|
|
|
|
|
Shown with optional extended
brackets (item # 72000-380) |
|
C3 Series Product Information
|
Easy to read, Back Lit LCD display Large Double Ball Valve Priming / Degassing Valve - Built-in Leak Detection - Built-in Diaphragm Failure Detection (DFD) Housing constructed of chemical resistant, powder coated 413 aluminum Suction tubing, injection fitting, and foot valve included
Tech. Data Sheet PDF Inst. Manual PDF (PN 80000-412)
Other info:
|
|
|
|
NEW! See our ProSeries video now. |
|
|
|
Series |
Junction Box |
DFD
(leak detection) |
Input |
Output |
FVS
(Flow Verification) |
4-20 mA |
0-10 VDC |
Pulsed |
Alarm Relay
(3 Amp) |
| C3F |
Optional |
Yes |
Yes |
No |
No |
No |
Yes |
| C3V |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
|
|
|
Priming / pressure relief valve (located on the pump head) Pump head adapters:
Inlet (suction side), Barbed for 1/2" tubing Outlet (discharge side), select one of the following
Foot valve / Strainer with 1/2" barbed tubing adapter Injection fitting with one of the following adapters:
Barbed, 1/2" tubing Threaded, 1/2" male NPT
Suction tubing, 8 feet (2.4 meters) of 1/2" clear PVC tubing Mounting brackets (2) with screws (extended brackets Sold Separately)
|
|
|
|
Blue-White's Stainless Steel extended brackets allow the pump to be securely mounted to most surface; floor, shelf, or skid. The brackets lift the pump up 4-1/2 inches (114.3 mm), allowing you to easily connect the suction side of the pump to your solution. |
Raise the metering pump 4-1/2 inches (114.3 mm) off the ground or a surface Made out of tough Stainless Steel Provides a stable mounting surface
|
| Item Number |
Description |
| 72000-380 |
Extended Mounting Brackets, 1 Pair, SS, 4 SS screws |
|
|
|
|
