VPE 1000 Ultrasonic Leak Detector from Monarch Instrument

VPE 1000 Ultrasonic Leak Detector, VPE 1000, Ultrasonic Leak Detector, Ultrasonic, Leak, Detector, Monarch, InstrumentHow does it Work...

Ultrasound works by detecting the high frequency sound associated with friction, arcing and turbulence in industrial systems. These sounds are translated/converted down to the audible range where they can be heard in the headset and viewed on the meter. Translation is done by heterodyning --comparing the incoming signal with one generated by the meter. Our meters are most sensitive to sounds around 40 kHz, that's twice the frequency of the best human hearing. Because we focus on a specific band of sound... wind noise, industrial noises, voices, traffic, and most normal operational sounds will NOT be detected. You can actually yell directly into the sensor and hear nothing. This exact frequency focus allows for precise leak detection and bearing defect discovery.

VPE 1000 is a patented ultrasonic detector which offers extraordinary features:

  • Advanced digital controls
  • Dedicated touch probe sensor for optimum sensitivity and sound quality
  • Two LED displays with peak hold
  • Separate volume and sensitivity settings
  • Dual Sensors-each independent
  • Wide dynamic range increases effectiveness in loud areas

Specifications

  • Power: 9volt Battery (supplied)
  • Battery Life: 8hrs. continuous
  • Displays: 10 element LED bargraph, and 4 element alphanumeric.
  • Frequency Response: 30-42 kHz Airborne, 18-22 kHz Probe (center)
  • Audio Output: 0 to 4 kHz
  • Sensitivity: -80dB/volt/microbar
  • Construction: ABS and Anodized Aluminum
  • Dimensions: 7.06 x 2.39 x 0.84"
  • Weight: 0.60 lbs.
  • Warranty One year

Download VPE 1000 Data Sheet